1. During installation, you can directly install the stainless steel pipe parts directly on the pipeline according to the connection mode, and install it according to the location used. Under normal circumstances, it can be installed in any position of the pipeline, but it needs to be convenient for the inspection of the manipulation. Note that the section of the stainless steel pipe parts of the stainless steel pipe parts should be under the vertical valve petals, and the stainless steel pipe parts can only be installed horizontally.
2. Apply a handwheel for stainless steel pipe parts. Do not use leverage or other tools to avoid damaging valve parts.
3. When the ball valve, deeper valve, and gate valve of the stainless steel pipe parts are used, it is only fully opened or closed. It does not promise to adjust the flow of flow to avoid the sealing surface from being eroded and accelerating the wear.
4. The stainless steel pipe parts stored for a long time should be checked on a schedule. The exposed processing surfaces should be kept clean, dirt, and cleanly stored in the air -permeable and dry places. Often maintain the dryness and ventilation of stainless steel pipe parts, clean and tidy the holder, and store it in accordance with the accurate storage method.
5. The bolt of the stainless steel pipe valve valve filling cover should be tightened on average, and should not be pressed into a crooked state, so as not to hinder the movement of the valve stem or cause leakage.
