OEM & Custom Stainless Steel Pipe Fittings
Custom stainless steel pipe fittings produced from customer drawings, samples, specifications and project requirements. Material grade, dimensions, wall thickness, fitting configuration, surface finish, marking and packaging requirements can be reviewed and confirmed before production.
- 30+ Years Manufacturing Experience
- 5,000+ Tons Annual Capacity
- 800+ Tons Stock
- ISO 9001 Quality Management System
What We Can Customize
Custom production covers standard fitting types with customer-specific dimensions, materials and configurations, as well as non-standard fitting requirements supported by drawings or detailed specifications.
Stainless Steel Elbows
Elbow size, wall thickness, configuration and material can be specified according to the required product dimensions and applicable standard.
Stainless Steel Tees
Straight tees, reducing tees and other specified configurations can be reviewed from drawings, dimensional data and material requirements.
Stainless Steel Reducers
Concentric and eccentric reducers can be produced according to required sizes, wall thickness, material grade and dimensional specifications.
Stainless Steel Flanges
Flange dimensions, connection details, material and applicable standards can be confirmed from customer drawings or technical specifications.
Stainless Steel Stub Ends & Caps
Dimensions, material grade and configuration can be reviewed for project-specific requirements.
Non-Standard Fittings
Special geometries and dimensions outside standard product configurations can be evaluated from drawings, samples or detailed technical information.
OEM & Custom Manufacturing Capability
Custom production is supported by an established stainless steel pipe fitting manufacturing operation with more than 30 years of production experience.
Manufacturing Capacity
The factory covers more than 10,000 m² and has 60+ sets of production equipment and 70+ supporting molds. Annual production capacity exceeds 5,000 tons, with 800+ tons of standing inventory.
Drawing-Based Production
OEM and ODM orders can be produced according to customer drawings, specifications and confirmed manufacturing requirements.
Production Continuity
Confirmed product specifications can be retained as a reference for repeat production, helping maintain the same technical basis across subsequent orders.
Product Identification
Marking requirements can be reviewed for product identification, order reference and other agreed information.
Each custom order follows a defined sequence from technical information to finished product.
Submit Requirements
Send a drawing, sample information, product specification or available dimensional data.
Technical Review
Material, dimensions, wall thickness, configuration, applicable standard and inspection requirements are reviewed.
Quotation
Pricing is prepared from the confirmed product requirements, quantity and production conditions.
Production Confirmation
Technical details and order requirements are confirmed before manufacturing begins.
Manufacturing
Production follows the confirmed specifications and agreed order requirements.
Inspection
Finished fittings are checked against the applicable product and inspection requirements.
Packaging & Shipment
Products are prepared according to the agreed packaging and shipment requirements.
Customization Parameters
Providing complete technical information helps establish a clear basis for quotation and production.
|
Parameter |
Information to Confirm |
|
Product type |
Elbow, tee, reducer, flange, stub end, cap or custom fitting |
|
Material |
Required stainless steel grade |
|
Size |
Nominal size or detailed dimensions |
|
Wall thickness |
Required or drawing-specified thickness |
|
Configuration |
Standard or custom geometry |
|
Connection |
Required connection details |
|
Standard |
Applicable product or dimensional standard |
|
Surface |
Required surface condition or finish |
|
Quantity |
Sample, trial or production quantity |
|
Marking |
Product identification requirements |
|
Packaging |
Customer-specific packing requirements |
Technical Review Before Production
Technical requirements are reviewed before production so the manufacturing basis is clear.
Drawing Review
Product geometry, dimensions and connection details are checked against the supplied drawing.
01
Material Review
The specified stainless steel grade is confirmed against the product and project requirements.
02
Dimension Review
Size, wall thickness and other defined dimensions are identified for production and inspection.
03
Standard Review
The applicable product or dimensional standard is confirmed from the customer specification.
04
Inspection Review
Required inspection points are identified before production when they are included in the order requirements.
05
Materials & Applicable Standards
Material and standard selection depends on the product specification, application and project requirements.
Stainless Steel Materials
Available materials include:
304L · 316L · 310 · 321 · 904L · Duplex 31803 · Duplex 32750 · 2520
Applicable Standards
Custom fittings can be reviewed against applicable:
ASTM · ASME · DIN · EN · JIS
The required grade and standard should be included in the drawing or RFQ when available. Final material and dimensional requirements are confirmed before production.
Manufacturing & Quality Control
Production and inspection requirements are established from the confirmed product specification.
Material Verification
A spectrometer is used for material testing as part of the inspection process.
Dimensional Inspection
Key product dimensions are checked against the confirmed technical requirements.
Wall Thickness Inspection
Wall thickness is measured according to the applicable product requirements.
Production Control
Manufacturing follows the confirmed product specifications and order requirements.
Final Inspection
Finished fittings are checked before shipment according to the applicable inspection requirements.
The quality management system is certified to ISO 9001.
Inspection & Documentation
Inspection requirements can be defined during the quotation and order confirmation stages.
Inspection Scope
Depending on the product requirements, inspection can cover:
● Material verification
● Dimensional measurements
● Wall thickness
● Visual condition
● Product quantity
● Product identification
Documentation
Available product and inspection documentation is confirmed according to the order requirements.
When specific documentation is required, the requirements can be submitted with the drawing or RFQ so the inspection scope is established before production.
Procurement & Order Support
Custom fitting procurement involves technical specifications, production requirements, inspection and shipment details. These requirements are reviewed as part of the order process.
Drawing & Specification Review
Available drawings and technical information are reviewed before quotation to establish the production requirements.
01
Order Coordination
Material, dimensions, quantity, inspection and packaging requirements are confirmed before manufacturing.
02
Quality Documentation
Required product and inspection documents can be discussed during order confirmation.
03
Export Packaging
Packaging requirements can be confirmed according to the product and shipment conditions.
04
Repeat Orders
Confirmed specifications can provide a reference for subsequent production of the same item.
05
Recommended RFQ Information
Product type
Material grade
Size
Wall thickness
Applicable standard
Quantity
Drawing or sample information
Application
Surface requirements
Inspection requirements
Packaging requirements
Drawing Submission
A detailed drawing provides the most useful reference for technical review. Product specifications, dimensional information or sample details can also be submitted for initial assessment.