How to polish and deform 304 Stainless Steel Elbow

1. When starting to polish the 304 Stainless Steel Elbow, use the 80 -purpose shutter wheel. The color is relatively easy to use. The apprentice is recommended to use red. It must be slow, not pressing force, and as much as possible when polishing.
2. After all, you start to change the 320-purpose shutter wheel to re-grind the time. The 320-mesh wheel must be polished very detailed, otherwise the 80-mesh sand wheel scratches will be left.
3. After the 320 -mesh -louver sand wheel is polished, the 304 Stainless Steel Elbow is waxed. It is better for novices to get more.
4. Then use the red hemp round to continue grinding.
5. Remember to clean the wax after grinding, it is easier to use some dust.
As well as
Let's understand how the Stainless Steel Bends Elbows is deforming?
1. The band -to -edge refers to the tube end to the inside or outside, forming a bulging or groove pipes in the circular direction of the tube;
2. turn the straight tube into a curved tube with different curvature radius, such as 304 Stainless Steel Elbow, bending pipes, etc.
3. Change the tube of the section, and change the circular section into a square, oval, polygon and other Stainless Steel Bends Elbows according to the requirements;
4. The stainless steel elbow changes the wall thickness along the length of the tube, making the Stainless Steel Bends Elbows turning the wall thickness;