Stainless steel 316L elbows are a prominent pipe type used in pipe construction, which is typical in steering connections. Different elbow areas (often 0°, 45°, 60°, 90°, and 180° stainless steel elbows) are assigned for various angles of elbows.
Before installing the stainless steel elbow, make sure it complies with the usage requirements on all sides. To repair any damage during shipping, the stainless steel elbow's surface must also be thoroughly cleaned. When the time is right, you can install it.
Please use the proper connection method for the place of usage to immediately put the stainless steel elbow into the pipe. Leaks must be prevented during installation and air tightness must be guaranteed.
The long-term storage of 316L stainless steel elbows necessitates timely inspection. The manufactured and machined surfaces frequently have open exteriors. It should be cleansed to remove dirt and kept clean in a location with excellent ventilation. Anything stacked or kept outside is prohibited. Stainless steel 316L elbows are normally kept dry, ventilated, and stored in accordance with the guidelines.
Specification
|
Product Name
|
weld 90 degree elbow
|
|
Size
|
1/2" to 48 "
|
|
Thickness
|
2mm - 50mm
|
|
Material
|
Stainless Steel
|
|
Surface Treatment
|
sandblasting,rolling sand |
|
Products are widely used in
|
Ship, electric power, metallurgy, natural gas, papermaking, environmental protection, water plants, refrigeration, heating, chemical industry, wind power, machinery, construction medicine, military industry, petroleum, marine oil, chemical and other pipeline system engineering.
|
Hot Tags: weldable 90 elbow, China weldable 90 elbow manufacturers, factory, stainless steel elbow in valve, stainless steel elbow in epoxy coating, stainless steel elbow in alkaline environment, steel elbows 304, stainless steel elbow jis, 310 stainless steel elbow
